The LokPilot 5 Basic was developed with the aim of
offering a modern decoder with a reasonable range of functions at a
reasonable price.
The LokPilot 5 Basic comes in two versions: In
addition to a version with an 8-pin NEM interface, a version with 21MTC
interface is also available. This makes the LokPilot 5 Basic
particularly suitable for use in track H0 vehicles.
Modes
The LokPilot 5 Basic is a "pure-bred" DCC decoder.
14 to 128 driving steps are as self-evident as 2- and 4-digit addresses.
Up to 20 functions can be triggered. Thanks to RailComPlus®, the
decoders log in fully automatically to a suitable digital center.
It masters all DCC programming modes and thanks to
RailCom® the CV values can be read out on the main track with suitable
control panels. Auxiliary registers exist for control panels that can
only program the CVs from 1-255.
The LokPilot 5 Basic Decoder detects the Märklin®
brake distances as well as the Lenz® ABC system. Braking with DCC brake
blocks or dc voltage is also possible.The LokPilot 5 Basic Decoder can
be used on analog DC webs. The maximum speed can be set separately.The
decoder switches "on-the-fly" fully automatically between operating
modes. Most of the time, nothing needs to be adjusted.
Functions
The LokPilot 5 Basic has 4 reinforced function
outputs in each version. In the 21MTC interface, there are 8 logic-level
outputs at the interface, two of which are also suitable for
controlling servos. All important lighting functions are available. The
brightness of each output can be set separately.
Motor
The motor control of the LokPilot 5 Basic delivers
up to 0.9A continuous current. A variable PWM clock frequency from 10kHz
to 50kHz ensures super-quiet operation, especially for bell anchor
motors – The typical "hum" is a thing of the past. The load control can
be adapted to difficult cases with up to 10 CVs. The unique "Autotune"
function allows the decoder to be automatically measured against the
motor.
Operational reliability
On request, a PowerPack can be connected to the LokPilot 5 Basic to bridge dirty rail cuts.
Protection
Of course, all function outputs as well as the motor
output are protected against overload. We want you to enjoy your
decoder for as long as possible.
