This kit contains the most important parts to build a Helis half-size module:

- 2 header plates, cut to size with all necessary holes and cutouts, plywood 12mm
- 2 side plates, plywood 12mm
- 1 top plate, plywood 6mm
- 2 pcs rectangular wood
- 2 receptacle plates for the 3 female connectors, 3D printed
- 2 drive.in nuts, M8
- 2 butterfly screws, M8
- 2 washers, M8
- 2 set of M4 screws, nuts washers for mounting the receptacle plates
- 6 banana jacks 4mm, 2 of each in the colour red, yellow and brown
- 3 two-way adaptors 4mm

Size of the built module: 36cm x 48cm x 11.5cm (L x W x H)

More information regarding the module and the assembly under: https://www.stayathome.ch/Helis_Module.htm

What you will also need:

- flex wire with 1.5mm2 min.
- Marklin C-Tracks
- paint, decoration stuff
- wooden legs
- screw-in feet

Write a review

Note: HTML is not translated!
    Bad           Good

Kit Helis Half-Size Module, 36cm. Luessi 7101

  • CHF 69.00

  • Ex Tax: CHF 69.00